General Information - Asus R300 User Manual

. General information

ASUS GO is a navigation system optimised for in-car use. It provides door-to-door navigation
for both single and multi-point routes using adaptable route parameters. ASUS GO is capable
of planning routes throughout the whole installed map set. Unlike some other products,
ASUS GO does not require that you change maps or switch to a poorly detailed general map
to navigate between map segments or countries. You always have complete freedom to go
wherever you wish. Just select your destination and go.
You do not need a stylus to use ASUS GO. All screen buttons and controls are designed so
that you can operate them with your fingertips.
You can access all functions of the program by using hardware and screen buttons. With
the help of these buttons you can travel through all the screens of the program. Most of
the screens (especially menu functions and settings) can be accessed from several other
screens, minimising the number of actions needed to reach the desired function.
When using ASUS GO, you do not need to 'double tap' or 'tap & hold' the touch screen as
these functions cannot be used reliably in a moving vehicle. A single tap triggers most of the
screen controls. The only exceptions are 'drag & drop' for moving the map, or scaling it in Map
mode (Page 33).
Most of the screens have a Return button in the top left corner. This arrow returns to
the previous screen or directly to one of the map screens.
Settings screens also have a Help button in the top right corner. This will show a
detailed description of the current settings screen.