Asus R300 User Manual page 64

Follow mode - lock to GPS position and heading (No. )
This semi-transparent icon is displayed if GPS position is available, and the map
has been moved. It also appears when you scale or tilt the map while Smart Zoom is
enabled.
This semi-transparent icon is displayed if GPS position is available, and the map has been
moved or rotated. It also appears when you scale or tilt the map while Smart Zoom is enabled.
Normally ASUS GO positions the map to keep the GPS position visible somewhere on the
map (when North-up orientation is selected), or always at the bottom centre of the map (when
Track-up orientation is selected).
If you manually move the map, it will freeze the map in the new position. To return to the GPS
position, use this Follow button.
When Smart Zoom is enabled, scaling or tilting the map also stops the automatic zooming or
automatic tilting respectively. To reactivate Smart Zoom, tap this button.
Tip: In Advanced settings you can set a delay time after which ASUS GO pushes the Follow
button for you on the Cockpit screen automatically. This can be turned on for re-enabling both
Lock-to-Position and Smart Zoom.
Cursor (No. )
As described earlier, if you tap the map somewhere or select one specific item in Find, it will
become the selected point on the map, marked with a small red dot and radiating red circles
to make it conspicuous. You can use this point as starting point, via point or destination for
your route, you can search for a POI near it, mark it with a pin, or save it as a POI.