List Selectors - Asus R300 User Manual

Portable navigation device
Hide thumbs Also See for R300:
Table of Contents

Advertisement

List selectors

When the values in the list need to be named, only the current value is shown (sometimes
together with a short description) in a horizontal stripe with arrows at both ends.
The arrows are buttons. Tap to move left in the list or move right. You need not confirm your
selection. As soon as you leave the screen, the selected value becomes effective.
Sliders
When a feature has several different unnamed (numeric) values, ASUS GO will show sliders
that look like analogue potentiometers to set the desired value.
If the value limits are not displayed at the ends of the slider, the leftmost position means the
minimum value, while the rightmost position represents the maximum value.
With most sliders you can check the current value on the left.
This control can be operated in two ways. Either drag the handle to move the slider to its
new position, or tap the slider where you want the handle to appear (the thumb jumps there
immediately). As with the list selectors, there is no need to confirm your selection. As soon as
you leave the screen, the selected value becomes effective.


Advertisement

Table of Contents
loading

Table of Contents