Transpose Buttons - ICON inspire 5G2 User Manual

8. Track </> buttons
Track <
Track > Shift "one" channel down for all faders (except the master channel)
9. Bank </> buttons
Bank< Shift "eight" channels up for all faders (except the master channel).
Shift "eight" channels down for all faders (except the master
Bank>
channel).

10. Transpose buttons

Raise or lower the pitches (by less than an octave) played on your keyboard.

Tip: While pressing and holding the "Transpose" button, press a keyswitch within
an octave range from the original c1 position to change the c1 to that particular
switch.

Note: Only the first zone could be changing the pitch if several zones are set.
11. Hold, Pad Roll & Key Roll buttons

"Hold", "Pad Roll" & "Key Roll" feature buttons are equipped for Pad & Key
rolling effect when using with touchpad.
12. DAW Selector section

InSpire G2 has built-in Mackie Control protocols & HUI for different DAW such
TM
as Cubase , Samplitude
selecting the correct DAW and Mackie control (HUI) protocol, InSpire G2 has
automatically mapped the major functions and work seamlessly with that DAW.


<< / >> buttons
DAW button



To change your InSpire G2 DAW mode, turn off and on the power switch to enter
the DAW selection mode. Select your desired DAW from the list with the "<<" /
">>" buttons.


Tips:

DAW button could not be activated if a DAW software is running.
Note:

We will update InSpire G2 firmware from time to time to support additional
DAW apart from the current existing list. Please check our official website to
download and upgrade your InSpire G2 firmware
Shift "one" channel up for all faders (except the master channel)
TM
, Abelton Live
These arrow buttons are used to scroll through the DAW
list. The name of the DAW will display on the LCD.
Press to enter the DAW selection.
TM TM
, Logic Pro and ProTool
TM
. By
7