Channel
Control
Value
Channel
Program
Program
Value
3.8 Expression Pedal
MIDI
message
Settings
type
Channel
Note
Note
Up value
Down value
Channel
Control
Value
Channel
Program
Program
Value
4. "Save file" button
Click this button to save your current settings for the InSpire G2. The file is an
".inspire" file.
5. "Load file" button
Click this button to load a previously saved ".inspire" setting file for your InSpire
G2.
6. "Send Data" button
Click this button to upload the iMap
USB connection.
Note:
You must have connected your InSpire G2 to your Mac/PC, otherwise the
settings upload will not be successful.
30
1 to 16
CC
0 to 127
o to 127
1 to 16
0 to 127
o to 127
Value
1 to 16
-1(C) to 9(G)
0 to 127
0 ro 127
1 to 16
CC
0 to 127
o to 127
1 to 16
0 to 127
o to 127
Set the midi channel of the pedal
Set the CC value of the pedal
Set the value that send togther with selected CC value
Set the midi channel of the pedal
Set the Program value of the pedal
Set the value that send togther with selected Program value
Set the midi channel of the pedal
Set the note value of the pedal
This value will be send when releasing the pressed pedal. It
will be send together with the selected Note value
This value will be send when pressing down the pedal. It will
be send together with the selected Note value
Set the midi channel of the pedal
Set the CC value of the pedal
Set the value that send togther with selected CC value
Set the midi channel of the pedal
Set the Program value of the pedal
Set the value that send togther with selected Program value
TM
software settings to your InSpire G2 via
Description