ICON inspire 5G2 User Manual page 27

3.4 Jog Wheel

With a combination of different buttons, there are virtually five different jog
wheels for the settings as the table below shows. To activate a different jog
wheel, click the jog wheel and a button as in the combination below.
Jog Wheel 1
Jog Wheel 2
Jog Wheel 3
Jog Wheel 4
Jog Wheel 5
MIDI
Jog Wheel
message
Function
type
Note
"Enter
(Click the
lower part of
Jog wheel)"
Control
Only click the jog wheel
Click the jog wheel and button "Zoom </>"
Click the jog wheel and button "Zoom Up/Down"
Click the jog wheel and button "Zoom In/Out"
Set the first key of the corresponding zone
Settings Value
Channel 1 to 16
-1(C) to
Note
9(G)
0 to
Up value
127
Down 0 to
value 127
Channel 1 to 16
0 to
CC
127
0 to
Value
127
Description
Set the midi channel of
knob
Set the note value of
knob
This value will be
send when releasing
the pressed knob (i.e.
release from enter). It
will be send together
with selected Note value.
This value will be send
when pressing down the
knob (i.e. enter). It will
be send together with
selected Note value.
Set the midi channel of
jog wheel
Set the CC value of knob
Set the value that will be
send together with the
selected CC value.
"All" Check box
Check this box to
assign the selected
channel to all jog
wheels
-
Check this box to
assign the selected
value to all jog
wheels
Check this box to
assign the selected
value to all jog
wheels
Check this box to
assign the selected
channel to all jog
wheels
-
Check this box to
assign the selected
value to all jog
wheels
27