Advance Settings - ICON inspire 5G2 User Manual

Advance settings

ICON has invented an innovative & unique technology – VirtualPort™ (Virtual multi-
USB ports matrix technology)
It allows the user to use four independent applications (software or sound bank etc)
simultaneously. 5 different zones are available for key switch, each with detailed
settings. The 12 pads are able to made detailed setting individually.
To enter into the Advance setting menu, press the "Advance" button. There are two
main settings including "Keyboard settings" & "Pad settings"
Advance settings
Rotate the first encoder to select "Keyboard set" and rotate the second encoder to
select the sub-menu functions as below:
Octave
Transpose
Channel
Velocity
Range
VirtualPort 1-4
MIDI Out
Programme
Rotate the encoder directly above each of the 5 zones showing on
the LCD to change the value from (-10) – (+10).
Rotate the encoder directly above each of the 5 zones showing on
the LCD to change the value from (-12) – (+12).
Rotate the encoder directly above each of the 5 zones showing on
the LCD to change the value from 1-16.
Rotate the encoder directly above each of the 5 zones showing on
the LCD to change the value from 1-12.
Note: For the different velocity curve diagrams, please refer to P.39
Rotate the encoder directly above each of the 5 zones to select
the zone (the selected zone will be marked with "*"), then press
the first & the last keys for setting the zone range.
These are the VirtualPort™ Virtual matrix settings. Select On or
Off for each zone with the encoders directly above the zones.
This representing the MIDI out port located at the rear panle of
InSpire G2. Rotate the encoder directly above each of the 5 zones
showing on the LCD to change the value from Off - On.
Rotate the encoder directly above each of the 5 zones showing on
the LCD to change the value from 0-127.
11