Pad settings
Rotate the first encoder to select "Pad set" and press the 12 pads to select pad
one to pad twelve. Rotate the second encoder to select the sub-menu functions as
below:
Mode
Channel
Velocity
Note
VirtualPort 1-4
MIDI Out
Layer 1-4
Reset
To reset InSpire G2 to the factory default setting. Rotate the first encoder to select
"Reset" and press the second encoder to activate the reset process.
VirtualPort™ Multi virtual USB port matrix technology
You may activate the 4 VirtualPorts on your applications very flexibly. As a maximum
you can have 4 different applications running and controlled by your InSpire
G2 at the same time. To activate the VirtualPort™ on your PC/Mac, select the
corresponding ports on your applications.
Note:
Different OS platform might show ports name differently, some examples as
below:
Windows XP
Windows 7
Mac OSX
12
Rotate the third encoder to select MIDI message type "Note" or
"Control"
Rotate the third encoder to select a value from 1-16.
Rotate the third encoder to select value from 1-6.
Note:
For the different velocity curve diagrams, please refer to P.40
Rotate the third encoder to select value from C4-g6.
These are the VirtualPort™ Virtual matrix settings. Select On or
Off for each pad with the third encoder.
This represents the MIDI out-port located at the rear panel of the
InSpire G2. Rotate the third encoder to select On or Off.
There are 4 layers on the pad. Press Button "Pad1" to "Pad4" for
layer 1 to layer 4 correspondently.
VirtualPort 1
VirtualPort 2
USB Audio
Device
iCON inspire
MIDIIN 2 iCON
G2 Vxx
inspire G2 Vxx
Icon inspire
Icon inspire G2
G2 Vxxx
Port 1
VirtualPort 3
USB Audio
USB Audio
Device [2]
iCON inspire
Icon inspire
Vxxx Port 2
VirtualPort 4
USB Audio
Device [3]
Device [4]
MIDIIN 3
MIDIIN 4 iCON
inspire G2 Vxx
G2 Vxx
Icon inspire G2
G2 Vxxx
Vxxx Port 4
Port 3