ICON inspire 5G2 User Manual page 31

7. "MIDI Devices" button

Click this button, a MIDI device select window will appear as shown in diagram
13. Please select "ICON InSpire G2" for the MIDI Out Devices.



Note: In order to upload your iMap settings to your InSpire G2. "InSpire G2"
must be selected at the pop-up window after clicking the "MIDI Device" button.
Make sure your InSpire G2 is connected to your PC/Mac before you do the
mentioned process.
8. "Firmware Upgrade" button

Click this button to enter into the firmware upgrade window for InSpire G2.
Please refer to P.32 for the firmware upgrade procedure.
Diagram 13
31