ICON inspire 5G2 User Manual page 26

Buttons
3.3

There are sixty-two buttons for the settings as the table below shows
MIDI
message Settings
type
Channel
Note
Down
Note
value
Up value
Channel
CC
Control
Value
Channel
Program
Program
LED synchronization check box
Check this box to activate the synchronization feature of selected buttons on the
InSpire G2 with DAW's correspondence button. Your DAW must have the feature
with a midi message sending to the hardware, otherwise the button may not
synchronize even if you have checked the box.
Note: You may activate the four VirtualPort™ & the MIDI Out port for each button.
So that its message will be send to the activated port(s). To activate, "check" the
correspondence check box.
26
Value
Set the midi channel of the
1 to 16
correspondence button
Set the note value of the
-1(C) to 9(G)
correspondence button
This value will be send when
pressing down the button.
0 ro 127
It will be send together with
the selected Note value
This value will be send
when releasing the pressed
0 to 127 button. It will be send
together with the selected
Note value
Set the midi channel of the
1 to 16
correspondence button
Set the CC value of the
0 to 127
correspondence button
This value will be send when
pressing down the button.
0 to 127
It will be send together with
the selected CC value
Set the midi channel of the
1 to 16
correspondence button
Set the program value of the
0 to 127
correspondence button
Description "All" Check box
Check this box to assign
the selected channel to
all buttons
-
Check this box to assign
the selected value to all
buttons
Check this box to assign
the selected value to all
buttons
Check this box to assign
the selected channel to
all buttons
-
Check this box to assign
the selected value to all
buttons
Check this box to assign
the selected channel to
all buttons
-