ICON inspire 5G2 User Manual page 25

3.2 Faders

There are nine faders for the settings as the table below shows
MIDI
message Settings
type
Channel
CC
Control
Touch
Note
Return
value
Channel
Program
Program
Touch
Note
Return
value


Note: You may activate the four VirtualPort™ & the MIDI Out port for each fader.
So that its message will be send to the activated port(s). To activate, "check" the
correspondence check box.
Value Description
Set the midi
channel of the
1 to 16
correspondence
fader
Set the CC
value of the
0 to 127
correspondence
fader
Set the value
-1(C) to that will be send
9(G) as soon as
fader move
Set the midi
channel that
will be send
1 to 16
together with
the selected CC
value.
Set the midi
channel of the
1 to 16
correspondence
fader
Set the program
value of the
0 to 127
correspondence
fader
Set the value
-1(C) to that will be send
9(G) as soon as
fader move
Set the midi
channel that
will be send
1 to 16
together with
the selected
Program value.
"ON" Check box
-
-
Check this box to
swicth on the function
Check this box to
swicth on the function
-
-
Check this box to
swicth on the function
Check this box to
swicth on the function
"All" Check box
Check this box to
assign the selected
channel to all
9-faders
-
Check this box to
assign the selected
value to all 9-faders
Check this box to
assign the selected
value to all 9-faders
Check this box to
assign the selected
channel to all
9-faders
-
Check this box to
assign the selected
value to all 9-faders
Check this box to
assign the selected
value to all 9-faders
25