Safety Precautions - Hilti PML 32 Operating Instructions Manual

5. Safety precautions

5.1 Basic information concerning safety
5.2 Correct use
In addition to the information relevant to safety given in
each of the sections of these operating instructions, the
following points must be strictly observed at all times.
The tool is designed for indoor use.
Vertical and/or horizontal lines can be projected by the
tool. The tool levels itself automatically.
The automatic self-leveling system must be deactivated
when the tool is used for applications in an inclined
plane.
– Check the accuracy of the tool at regular intervals.
– To achieve maximum accuracy, project the lines onto
an even, vertical surface. Align the tool at 90° to the
surface.
– The tool and its ancillary equipment may present
hazards when used incorrectly by untrained personnel
or when used not as directed.
– To avoid the risk of injury, use only original Hilti
accessories and additional equipment.
– Modification of the tool is not permissible.
– Observe the information printed in the operating
instructions concerning operation, care and
maintenance.
9
5. Safety precautions