Hilti PML 32 Operating Instructions Manual page 20

To switch on only the vertical beam:
1. Press the selector button twice.
To switch on the horizontal and vertical beams:
1. Press the selector button three times.
7.1.3 Working in an inclined plane
1. Press the pendulum lockbutton (the pendulum is
then locked).
2. Switch on the horizontal and/or vertical beam.
-NOTE-
The laser beam blinks approx. every 2 seconds
when the pendulum is locked.
7.1.4 Switching the tool off
1. Press the selector button repeatedly (1-3 times
depending on previous operating mode) until the
laser beam is no longer visible and the LED no
longer lights.
-NOTE-
The tool switches itself off automatically after
approx. 15 minutes.
16
7. Operation