Hilti PML 32 Operating Instructions Manual page 14

– Do not render safety devices ineffective and do not
– Keep laser tools out of reach of children.
– Have the tool repaired only at a Hilti service centre.
– Do not expose the tool to rain or snow and do not use
5.3 Proper organization of the workplace
– Secure the area in which you are measuring and take
– Avoid unfavorable body positions when working on
– Measurements taken through panes of glass or other
– Ensure that the tool is set up on a steady surface (not
– Use the tool only within its specified limits.
remove information and warning notices.
Failure to follow the correct procedures when opening
the tool may cause emission of laser radiation in
excess of class 2.
it in damp or wet environments or where there may be
a risk of explosion.
care to avoid directing the beam towards other
persons or towards yourself while setting up the tool.
ladders or scaffolding. Make sure you work from a
safe stance and stay in balance at all times.
objects may be inaccurate.
subject to vibration).
10
5. Safety precautions