Functional Description; Interface Connectors; Activity/Link; Power - ProfiTap C1-100 Instruction Manual

2. Functional description

2.1 Interface connectors

It has 4 RJ45 ports, port A and B are connected to the net-
work, TAP ports A and B are connected to the analyzer.
Network ports A and B are hardware wired together.

2.2 Activity/Link

Two LEDS indicate Activity in 10Mb and Link in 100Mb speed.
Activity LED A lights up when a signal is received at port A,
LED B for a signal received at port B. The brightness of the
Activity LED show signal strength.

2.3 Power

C1-100 tap is redundant powered from the back. Using redun-
dant powering guarantees a maximum uptime off the tap/
monitor ports. Two LEDs show the presence of power.

2.4 Power Failure

Uninterrupted link in the network guarantees permanent
network connectivity, also when power fails. Redundant pow-
ering guarantees maximum uptime of the monitor ports. No
data is passed to the TAP ports at power failure.
www.profitap.com Page 4