Installation - ProfiTap C1-100 Instruction Manual

3. Installation

a. Power the unit using the 12V PSU, the Power LED lights
b. Connect it into the network using Category 5 UTP cables.
Network Port A : to DCE by straight Cable / to DTE by cross-over cable.
Network Port B : to DTE by straight Cable / to DCE by cross-over cable.
TAP port A and B : to analyzer through straight cables (pins 3/6 active).
The maximum distance between any of the connected devices is 90mtr.
TAP port A mirrors data received in Port A, TAP port B mirrors data
received in Port B.
www.profitap.com Page 5