Profishark 1G Visual Description - ProfiTap PROFISHARK 1G User Manual

Page 6

PROFISHARK 1G Visual Description

1. Port A (RJ45) connected to the network
2. Port B (RJ45) connected to the network
3. (see below)
4. (see below)
5. (see below)
6. Power indicator LED
7. USB 3.0 connector linked to your monitoring device (i.e. a laptop computer)
8. DC input (5V/1A)
The PROFISHARK's state is displayed on the front LEDs (3, 4, 5). LEDs
functionalities are named on top of the PROFISHARK.
TAP functions:
Steady LED 10 (4): TAP is operating at 10 Mbit/s
Steady LED 100 (5): TAP is operating at 100 Mbit/s
Steady LED 10 (4) and LED 100 (5): TAP is operating at 1000 Mbit/s
Steady Link/activity (3): the port is linked up
Blinking Link/activity (3): the port is linked up and has RX/TX activity
Blinking LED 10 (4) and LED 100 (5): TAP not connected or trying to connect
Alternating LED 10 (4) and LED 100 (5): TAP cannot find a common speed
between Networks A and B
General functions:
Blinking LED 10 (4): The PROFISHARK is initializing
Blinking LED 100 (5): The PROFISHARK HW firmware is corrupted