Main Landing Gear Installation
Collect these parts.
ÿ 1 main landing gear legs
ÿ 6 832 x 1/2 socket head bolts
ÿ 6 lock washers
ÿ 6 flat washers
Using a sharp XActo knife, carefully remove the covering from the Fuselage where the Landing Gear legs will be
inserted through the Fuselage sides.
Insert the gear legs into the Fuselage and secure using 3 x 832 bolts and washers.
Tighten the bolts into the treaded holes in the Landing Gear.
NOTES: Be very careful that you do not cross thread any of the bolts.
You may have to enlarge the holes in the Plywood Mounting Plate to allowLanding Gear Bolts to line up
with threaded holes in Landing Gear.
12