Wing Strut Assembly
Collect these parts.
ÿ 2 main wings
ÿ 1 wing tube
ÿ 2 ¼ 20 nylon wing bolts
ÿ 2 front wing struts (has slots)
ÿ 2 rear wing struts
ÿ 2 factory bent wire interplane wing struts
ÿ 2 lower wing cuffs
ÿ 2 upper wing cuffs
ÿ 2 lower wing strut/Fuselage mounting brackets
ÿ 4 632 x ½ socket head cap bolts
ÿ 8 632 x ¾ socket head cap bolts
ÿ 8 – interplane wing strut aluminum brackets
Carefully slide and position the Wings on the Fuselage and secure
them to the Fuselage tightly using the supplied ¼20 nylon Wing
bolts. You will notice a wooden dowel is provided to align the
Wing in the proper position on the Fuselage.
NOTE: When tightening the Wing Bolts do not crush your Servo Extensions between the Wings and Fuselage.
Slide the Aluminum Wing Tube into the factory installed tube in the
Fuselage. Make sure an equal amount of tube is showing on both sides
of the Fuselage.
16