Main Wheel Axel Installation
Collect these parts.
ÿ 2 main landing gear legs
ÿ 2 main wheel axels
ÿ 2 axel nuts
ÿ 4 axel lock collars
NOTE: You may want to remove any burrs from the axel using a rotary tool so that the wheel collars will easily slide
over the axel shaft.
Secure the axel to the main Landing Gear legs using the supplied hardware. Do not over tighten the Axel Nut or it could
pull apart.
HINT: Grind flat spots on the end of the axles where the outside lock collar will mount so the set screw can hold
stronger.
9