Main Landing Gear Installation - RC Guys Super Decathlon ARF Assembly Manual

Main Landing Gear Installation
Collect these parts.
ÿ 1 ­ main landing gear legs
ÿ 6 ­ 8­32 x 1/2 socket head bolts
ÿ 6 ­ lock washers
ÿ 6 ­ flat washers
Using a sharp X­Acto knife, carefully remove the covering from the fuse where the landing gear legs will be inserted
through the fuse sides.
Insert the gear legs into the fuse and secure to the mounts using 3 x 8­32 bolts and washers. You will note the T nuts have
been factory installed.
Tighten the bolts.
Note: Be very careful that you do not cross thread any of the bolts as this may loosen the T nuts.
­11­