Secure the Wing Strut assembly to the Wing using the supplied hardware, 632 x ¾" bolts.
TIPS: You could insert nylon washers between the Struts and Wing surface to reduce the pressure on the covering and
balsa.
Use a magnet to help find hidden fasteners if you are having difficulty using the Wire Struts as a guide..
To add some strength to the end of the Struts you could Epoxy wooden plugs into the opening.
Slide the top Wing Strut Cuff over the Bolt and secure it using clear packing tape or equal.
NOTE : You can use clear silicon if you wish a more permanent attachment.
Locate and install the interplane Wing Struts Brackets over the wire ends.
Secure the interplane Struts to the Wing using the supplied hardware, 632 x ½" bolts and nuts. Some bending may be
required.
18