Top & Side Window Installation
Collect these parts.
ÿ 1 top window
ÿ 2 front side windows
ÿ 2 rear side windows
Using a sharp Xacto knife, carefully remove the covering from the top window opening on the Fuselage. Leave enough
covering to fold into opening but not so much as to cover the bottom of the "L" shaped ledge that the window will need to
glue to. Use a Covering Iron to seal the folded edge of the covering.
HINT: Save this piece of covering for any future repairs.
Place the Windows into their cut outs in the Fuselage and tape in place
until the glue is dry.
NOTE: You may want to add weights to hold the top window in
place and masking tape on the side windows until the glue dries.
Using Canopy Glue carefully add a small bead of glue to the edges of
the window.
Be careful not to get any glue on your fingers or the Window.
24