Side Door Installation; Aileron Hinge Installation - RC Guys Super Decathlon ARF Assembly Manual

Side Door Installation
Collect these parts.
ÿ 2 ­ hinge point
ÿ 1 ­ side door.
Trial fit the door into the Fuselage. You may need to trim the door for the
best fit. When satisfied with the fit and operation, secure the hinges into
the Fuselage using Epoxy Glue. Let the hinges dry before opening the
door.
Aileron Hinge Installation
Collect these parts.
ÿ 8 ­ hinge point
ÿ 2 ­ ailerons
The Aileron hinges provided are a top quality hinge point. They have been factory drilled and fitted but are not glued in
place. You will need to remove them prior to gluing.
Dab a small amount of Epoxy or canopy glue to each hinge and insert them into the Aileron hole until the hinge is just
touching against the Aileron. Remember to make sure they are moving in the proper direction.
HINT: use a small drop of light oil on the hinge so that the glue does not secure or clog the hinges.
Wait until the glue is dry before gluing the Ailerons into the Wings.
Using Epoxy Glue, secure the hinge points into the door frame.
Check for proper direction of the hinge movement. Let the glue dry
before inserting the hinges into the Fuselage.
­ 13 ­