Z58Ht Horizontal Installations- Wall Thimble Sizing / Termination Sizing - Marquis Atrium MCVP42NH Installation Instructions Manual

Z58HT Horizontal Installations- Wall Thimble Sizing / Termination Sizing-

NOTE: If you are installing 5/8 Termination in an existing wall, measure diameter of both Wall
Thimble and Termination.
Wall Thimble mount plate comes in two sizes: Termination Plate comes in two sizes:
13-5/16"
14-5/16"
13-3/4"
15-3/4" Old Termination New Termination
Siding Shield (If required): Siding Shield (If required):
New wall thimble
Old wall thimble
Z58SSLR
ZDVSSLR
In the future, Wall Thimble mount plate will be smaller than Termination Plate as a running change
has been implemented.
Wall Thimble may need to be trimmed on outside mount plate to be completely hidden by termination.
See next page for possible combinations.
57