Table of Contents
Advertisement
REQUIRED RADIO DIMENSIONS
Verify the radio will fit by following the suggested dimensions below. Carefully cut or
file as necessary until the sleeve easily slides into the opening.
ISO INSTALLATION
1.
For installations that do NOT require the use of the DIN collar. The radio has
threaded holes in the chassis side panels for ISO mount applications. If necessary, four
M5x10mm screws are included with the hardware pack to assist you.
INSTALLING THE RADIO
1.
Place the DIN collar into the dash opening. Bend the tabs outward as shown on
the drawing below to lock into place.
14
Hide quick links:
Advertisement
Table of Contents
