Ipod®/Iphone® Operation; Aux Operation - REI ECD-5500 Installating And Operation Manual

iPod®/iPhone® OPERATION
To listen to audio through your apple device, verify that a 30-pin USB extension is
connected to the USB pigtail on the rear of the radio.
cable to the Apple device. Once connected, the radio will automatically switch
the source to iPod® and begin charging the device. If the device has enough
battery power. It will begin playback.
1. Operational Mode
2. Shows the elapse time of the audio track.
3. Indicates the file number and number of files in the folder.
4. Displays the Track Title, Artist, and Album information of the file if
available.
When connected, the user can playback specific files or folders. First press the
SEARCH button. The user can then rotate the VOL/SEL knob to select one
of the following search options:
•
Playlists
•
Podcasts
•
Audiobooks
•
Songs
•
Albums
•
Artists
Press the VOL/SEL knob to choose. To return to a previous menu, press
the RETURN
radio's SEEK up/down buttons to change tracks, or the
PLAY the track.
To return to the iPod® source from any other source menu, touch MODE on the
front panel until the iPod® icon is shown on the front display.

AUX OPERATION

Press the MODE button on the front panel until the display shows either AUX 1
or AUX2. AUX 1 uses the front 3.5mm audio input while AUX 2 uses the rear
RCA L/R audio inputs. It may be necessary to adjust the VOLUME level of the
AUXILARLY input device if too little or too much signal is present.
button and choose again using the VOL/SEL knob. Use the
Next, connect the 30-pin
11
button to PAUSE or