Operation - REI ECD-5500 Installating And Operation Manual

OPERATION

1) Power Button
Press the Power Button to turn the unit ON or hold to turn the unit OFF. The button
will illuminate RED when OFF and BLUE when ON. Note: Radio can also be
powered on by pressing any front button when ANY .
2) Select Knob
Press and hold this button to access the radio SETUP MENU.
3) Scan/Search Button
Press and hold this button for 2 seconds to auto program available stations into the
preset memory buttons. This function will erase previous memorized stations and
store the newly searched stations. Once completed, the radio will scan for 5 seconds
through each of the preset stations of either the AM or FM band and stop.
4) BAND/Back Button
Press this button to change radio bands as follows:
FM1—FM2—FM3—AM1—AM2
5) TUNE/SEEK DOWN Button
Under Radio mode, press this button momentarily to manually tune downward. Press
and hold a button and the radio will automatically seek to the previous radio station.
When playing digital media, use this button to track backwards to the previous track.
This button also functions as Weather Band Channel access. Under Weather Band
mode, press this button to select Weather Band channels 1-7.
6) TUNE/SEEK UP Button
Under Radio mode, press this button momentarily to manually tune upward. Press
and hold a button and the radio will automatically seek to the next radio station.
When playing digital media, use this button to track forwards to the next track.
This button also functions as Weather Band Channel access. Under Weather Band
mode, press this button to select Weather Band channels 1-7.
7) Preset Memory/Recall Buttons 1-6
Press these buttons momentarily to select the preset stations.
Press and holding a button will set the current station to the button being pressed.
**Preset buttons are pre-assigned frequencies in Weather Band Mode.
8) CALL Button
Press this button to Place or Answer an incoming call when successfully paired using
the Hands Free Profile on a Bluetooth® enabled phone. Press this button to transfer
the call from the radio to the phone and vise versa.
9) END Button
Press this button to END a call when successfully paired using the Hands Free Profile
on a Bluetooth® enabled phone. Press this button to quickly disconnect a paired
device from the radio when in BT PHONE mode.
4