How To Keep Your Oven In Shape - IAG IOM75S User Manual

How to keep Your Oven in Shape

This appliance is for household use only, don't
use it outdoors!
Important: Before cleaning your oven, or
performing maintenance, disconnect it from
the power supply.
To extend the life of your oven, it must be cleaned
frequently, keeping in mind that:
Do not uses steam equipment to clean the appliance.
■ ■
To protect against the risk of electrical shock, do not
■ ■
immerse the unit, cord or plug in water or other liquid
or sprinkle water to clean the appliance!
Don't clean the appliance when it still hot! The inside
■ ■
and external surface of the oven should preferably be
cleaned by damp cloth when it is cooled down.
Wash all accessories in hot sudsy water or in a
■ ■
dishwasher, wipe dry with a paper or cloth towel.
If you use your oven for an extended period of time,
■ ■
condensation may form. Dry it using a soft cloth.
There is a rubber seal surrounding the oven opening
■ ■
which guarantees its perfect functioning. Check the
condition of this seal on a regular basis. If necessary,
clean it and avoid using abrasive products or
objects to do so. Should it become damaged, please
contact your nearest After-sales Service Centre. We
recommend you avoid using the oven until it has
been repaired.
Never line the oven bottom with aluminium foil,
■ ■
as the consequent accumulation of heat could
compromise the cooking and even damage the
enamel.
Clear the glass door using damp cloth and dry it with
■ ■
a soft cloth. Do not use harsh abrasive cleaners or
sharp metal scrapers to clean the oven door glass
since they can scratch the surface, which may result in
shattering of the glass.
14 IAG 750mm Oven HOW TO KEEP YOUR OVEN IN SHAPE
Replacing the Lamp in the Oven
Cut off the supply of power to the oven by turning
■ ■
off the omni-polar switch connecting it to the mains,
or by removing the plug if it is accessible;Aovids
appearing the electric shock;
Unscrew the glass cover attached to the lamp holder;
■ ■
Unscrew the lamp and replace it with another
■ ■
high-temperature lamp (300℃) with the
following characteristics:
• Voltage: AC220V-240V
• Wattage: 15W
• Socket: E 14
Remount the glass cover and reconnect the appliance
■ ■
to the power supply.
WARNING: Ensure that the appliance is
switched off before replacing the lamp to
avoid the possibility of electric shock.
WARNING: Do not operate appliance with
damaged cord or plug or after the apliance
malfunctions, or has been damaged in any
manner, return appliance to the nearest
Authorized Service Center for exanmination.
Repair, or adjustment!