Advertisement
DOUBLE DIN HEAD UNIT PROVISION/
ISO ST ACKED HEAD UNIT PROVISION
1
Slide the DDIN radio unit into the
DDIN bracket/radio housing assembly
and secure the unit to the kit using
the (8) Phillips screws supplied with
the kit. (Figure A)
2
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
3
Snap kit/ radio assembly into the
dash opening.
Note: This installation kit is an extremely tight fit and requires force to be
"snapped" into the dash opening. Removal of aftermarket radio is even
more difficult than installation, so please be sure to fully test the after-
market radio prior to completing the kit's installation.
1-800-221-0932
REV. 09-02-09
95-9012 KIT ASSEMBL Y/ FINAL ASSEMBL Y
© COPYRIGHT 2009 METRA ELECTRONICS CORPORATION
A
www.metraonline.com
2
INST95-9012
Advertisement
