Advertisement
Wireless N PCI Adapter
RNX-N250PC2
The Quick Installation Guide will help you to install RNX-N250PC2 300M Wireless N
PCI Adapter in Windows XP/ Vista/ 7, including basic hardware and software
installation, as well as configuration of wireless network availability. For detailed
instructions, please refer to the User Guide in the Resource CD.
A. Hardware Installation
1.
Turn off your computer and unplug the power cord from the computer.
2.
Open the case. Locate an available PCI slot and remove its slot cover. Keep the
screw.
3.
Insert the adapter into the PCI slot.
4.
Secure the adapter with the screw removed in Step 2.
5.
Close the case and insert the power cord back into the computer.
6.
Turn on your computer.
You may see the Found New Hardware Wizard after the adapter has been inserted.
Please click Cancel.
B. Software Installation
The installation procedures in Windows XP/ Vista/ 7 are similar. Here takes the
procedures in Windows XP for example.
1.
Insert the Resource CD into your CD-ROM drive, and open the folder named
RNX-N250PC2. Double-click Setup.exe to start the installation, and then the
following screen for preparing setup will appear.
1
Quick Installation Guide
Advertisement
