Chapter 2: Getting Started; Hardware Installation - Rosewill RC508 User Manual

4-Port External USB 3.0 PCI Express Card

Chapter 2: Getting Started

2.1 Hardware Installation

1. Turn off the power to your computer.
Unplug the power cord and remove your computer's cover.
2.
3. Remove the slot bracket from an available PCIe slot.
To install the card, carefully align the card's bus connector with the
4.
selected PCIe slot on the motherboard. Push the board down firmly.
Replace the slot bracket's holding screw to secure the card.
5.
6. Secure the computer cover and reconnect the power cord.
2.2 Driver Installation
1. Insert the provided CD into your disk drive. The CD-ROM will start
automatically. When the following screen appears, please click
"Install Driver".
Note: If the install program doesn't run automatically, please locate
and double-click on the Autorun.exe file in the CD to launch the
install program.
RC508
*Note: Actual image may vary
4
User Manual