Advertisement
PARALLEL PCI Express CARD1 Port
Hardware Installation
1.
Turn Off the power to your computer.
2.
Unplug the power cord and remove your computer's cover.
3.
Remove the slot bracket from an available PCIe slot.
4.
To install the card, carefully align the card's bus connector with the selected PCIe slot on
the motherboard. Push the board down firmly.
5.
Replace the slot bracket's holding screw to secure the card.
6.
Replace the computer cover and reconnect the power cord.
Driver Installation
For Windows® 2000
1.
Insert the Driver CD into the CD-ROM drive.
2.
At the Found New Hardware Wizard, click Next.
3.
Select Search for a suitable driver for my device (recommended), and click Next.
4.
Check CD-ROM drives, uncheck the other boxes, then click Next.
5.
Click Next.
6.
Click Finish to complete the driver installation.
For Windows® XP/Server 2003/XP-x64/Server 2003-x64
1.
Insert the Driver CD into the CD-ROM drive.
2.
At the Found New Hardware Wizard, select Install the software automatically
(Recommended), then click Next.
RC-302E
2
User Manual
Advertisement
