ESAB Multimaster 260 Instruction Manual page 32

SeCTION 4
4.2.3 ReMOTe CONTROL MODULe (OpTIONAL)
pN-0558002605 (Figure 16)
This optional control panel mounts to the front of the power
source to the right of the main power switch (see Figure 13).
The remote receptacle is designed for Tig current control
using a foot pedal or manual thumb control. The module
includes a toggle switch to select between PANEL or REMOTE
control of the welding current and contactor. See Instruction
Literature F15-618.
Figure 16 Remote Control Module
4.2.4 SpOOL GUN CONTROL MODULe (OpTIONAL)
pN-0558002606 (Figure 17)
This module mounts to the front panel just left of the Mig
Gun trigger connectors and allows the use of either the MT-
250SG or ST-23A spool guns with the Multimaster 260 (ST-
23A requires adaptor P/N 37301). The module has a switch
to select either spool gun or regular Mig gun operation. See
Table 3 for MIG Spool Gun Parameters. See Instruction Litera-
ture F15-619.
Figure 17 - Spool Gun Control Module
32
OpeRATION