NEUTRAL SWITCH BRACKET
The neutral switch bracket has been changed to be secured with
two bolt from the middle of 2002 year model.
NOTE:
When install a late type neutral switch bracket to the early cylin-
der, secure the neutral switch bracket with one bolt. In this case
use the upper side bolt hole on the neutral switch bracket, and
apply Thread Lock 1342 to the bolt.
UNDER OIL SEAL HOUSING
Before installing under oil seal housing, apply grease to oil seal
lip, under oil seal housing and crankshaft.
% 99000-25160 : Water Resistant Grease
FORWARD GEAR THRUST WASHER
Available thickness
2.0 mm and 2.2 mm
Early
→
2.0 mm only
Late
DF40/DF50 "K3" ('03) model 11
Forward gear thrust washer