Service And Repairs - Toro Groundsmaster 3500-D Service Manual

Service and Repairs

Change Engine Oil and Filter
Change engine oil and filter initially after the first 50
hours of operation. Thereafter, change oil every 50
hours and oil filter every 100 hours.
1. Park machine on a level surface, lower cutting units,
stop engine, engage parking brake, and remove key
from the ignition switch.
2. Remove either drain plug and let oil flow into drain
pan. When oil stops flowing, install the drain plug and
tighten securely.
3. Remove oil filter. Apply light coat of clean oil to the
new filter gasket before screwing filter on. Do not over- -
tighten filter. Tighten filter 1/2 to 3/4 turn after gasket
contact.
4. Add oil to crankcase (see Check Engine Oil).
Kubota Diesel Engine
1
1. Drain plug
1. Oil filter
Page 3 - - 8
Figure 10
2. Oil pan
1
Figure 11
2. Alternator
Groundsmaster 3500--D
2
2