Table of Contents
Advertisement
Edit Setup Mode
Saving User Setups
Naming a User Setup
To rename the Setup, first press one of the Chan / Param buttons to change the parameter.
You should see the following in the display:
The bottom line of the display shows the current Setup name. Note that by default the first
character is selected and the cursor is under it. New Setup names can total 16 characters in
length. (Note that Setup names that are 16 characters in length cause the ID number and
Setup name to scroll marquee-style in the display.) Use the secondary alphanumeric functions
of the Category buttons to enter the new Setup name.
Press the Previous or Next button to move the cursor. Press the +/- button to switch
between upper and lower case characters (all characters will be upper case until you press
the +/- button again). Use the Space button to change the current character to a space, the
Insert button to insert a blank space (all the characters to the right will move one space to
the right), and the Delete button to delete the current character (all the characters to the
right will move one space to the left).
Saving a User Setup
When you finish changing the ID number and naming the Setup, the Save button LED
should still be blinking. Press the Save button to complete the process. Saved User Setups
have an asterisk between the ID number and Setup name.
If you press a Mode button to switch Modes before you save the Setup, the display will show
a
saved, the SP5 will switch to the Mode you selected. If you press the Previous button, it will
cancel the save and the SP5 will switch to the Mode you selected. Press any Mode button
again and the SP5 will switch to that Mode.
Deleting User Setups
To delete a User Setup, select the Setup and press the Keypad category button. After you
press the Keypad button, press the Delete button. The Delete button's LED lights and
begins to blink. The display shows the following message.
Press the Next button to delete the Program or any other button to cancel. Note that the
Keypad button is still active, press the button again to disable it.
8-18
Rename Setup as: 2/2
New Setup
_
message. Press the Next button to save the current Setup. When the Setup is
Setup Xpose:0
1024*New Setup
Del ete Setup
1024 New Setup ?
Advertisement
Table of Contents
