Table of Contents
Advertisement
NOTE: In the event a display line of text exceeds 20 characters, the text will scroll across
the display marquee-style.
Previous (–) and Next (+) Value Buttons
Use the Next and Previous buttons to scroll through the list of items on the display.
Pressing both the Next and Previous buttons simultaneously is called Value Jump and
is referred to as the Value Jump buttons. Depending on the current Mode or operation,
the Value Jump buttons can select the next Category or default Program, jump to specific
intervals, and reset parameter values. For more information, see Value Jump on page 3-9
Chan / Param Buttons
In Program Mode, pressing the Chan / Param Up (
transmit channel from the current channel to the next one; pressing the Chan / Param
̌
Down (
) button will change the MIDI transmit channel from the current channel to the
previous one. When the highest or lowest MIDI transmit channel is reached, the list will
wrap back to the last or first MIDI transit channel respectively. The top line of the display
shows the current MIDI transmit channel.
In the other Modes—Edit Setup, Global, and System—pressing the Chan / Param buttons
will scroll through the parameter list for the current Mode. As shown in the example below,
the top line of the display shows the current parameter number / total number of
parameters.
NOTE: The Chan / Param Up (
used in Setup Mode.
Alpha Wheel
Use the Alpha Wheel to scroll through the list of items on the display—turning the
Alpha Wheel counter-clockwise will select the previous item and turning the Alpha Wheel
clockwise will select the next item. You can turn the Alpha Wheel slowly to change the value
by one increment or turn it quickly to jump several increments.
Display Contrast Knob
You can adjust the display contrast by turning this small potentiometer knob.
Gl obal
FXSel :Perf
̂
) and the Chan / Param Down (
Features of the SP5
̂
) button will change the MIDI
4/30
̌
) buttons are not
Navigation
3-7
Advertisement
Table of Contents
