Features; Functions And Performance; Adaptability - Fujitsu MHV2200BT Product Manual

Table of Contents

Advertisement

Device Overview

1.1 Features

1.1.1 Functions and performance

The following features of the disk drive are described.
(1) Compact
The disk drive has up to 3 disks of 65 mm (2.5 inches) diameter, and its height is
12.5 mm (0.492 inch).
(2) Environmental Protection
The disk drive comply with the RoHS(Restriction of the use of certain Hazardous
Substances in electrical and electronic equipment) directive issued by European
Union(EU).
(3) Large capacity
The disk drive can record up to 66 GB (formatted) on one disk using the RLL
recording method and 30 recording zone technology. The disk drive has a
formatted capacity of 200 GB (MHV2200BT) or 160 GB (MHV2160BT)
respectively.
(4) High-speed Transfer rate
The disk drive has an internal data rate up to 51.8 MB/s. The disk drive supports
an external data rate 1.5 Gbps (150 MB/s) (Serial-ATA Generation-1). And the
disk drive realizes a high performance by high-speed transfer rate combined with
Native Command Queuing (NCQ).
(5) Average positioning time
Use of a rotary voice coil motor in the head positioning mechanism greatly
increases the positioning speed. The average positioning time is 12 ms (at read).

1.1.2 Adaptability

(1) Power save mode
The disk drive is ideal for applications since it supports the power save mode
function that works in each of the Idle, Standby, and Sleep modes and has the
Partial and Slumber interface power management functions. And automatically
power down by APM function makes the disk drive ideal for mobile use where
power consumption is a factor.
(2) Wide temperature range
The disk drive can be used over a wide temperature range (5 °C to 55 °C)
(3) Low noise and vibration
1-2
C141-E244

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mhv2160bt

Table of Contents