Changing The Preset Parameters - Meridian 541 User Manual

Changing the preset parameters

Each preset provides a series of parameters which you can vary
to customise the behaviour of the preset to your specific
requirements. For example, most presets provide a Delay
parameter, to allow you to specify the delay applied to the rear
surround speakers in order to change the spaciousness of the
sound.
Parameter
Balance
Rear
Delay
Centre
Sub
OSD
Stereo only provides the parameters Balance, Sub, and OSD.
Mono only provides the parameters Sub and OSD.
22
Range
-10 to +10
-30dB to +10dB
0 to 30.0 ms
-3.0dB to +3.0dB
-10dB to +10dB
Off, Low, Med, High
You can save the changes you have made to a preset so that
you can use the same settings whenever you want. You have a
choice of saving changes to the built-in preset, or you can
create a new preset with a name of your choice. User-defined
presets appear in the list of presets after the built-in ones.
The following table shows the parameters available for each
preset, and their standard values:
Default What it changes
0 The L-R balance.
+0 The relative level of the surrounds.
25.0 The spaciousness of the surrounds.
0 The integration of the centre speaker.
0 The relative level of the subwoofer.
Low The position of the on-screen display.