To change a preset parameter
Make sure the menus are unlocked; see To unlock the menus,
page 20.
Press > or < until the display shows the name of the
parameter you want to change.
For example:
Press A or V to change the value of the parameter.
As you change the value you will be able to hear the effect on
the sound, and the display shows the current value.
For example:
After a short delay the display reverts to the standard display of
preset and volume.
Note that the parameter will be restored to its stored value if you
change preset. To change a parameter permanently see the next
section.
De lay
25. 0
De lay
30. 0
23