Connecting Video - Meridian 541 User Manual

Connecting video

To connect a TV
541 Surround Controller
TV TV
OUT IN
Connect the TV C-VIDEO OUT or the TV SCART connector to
the television SCART input or composite video input using a
suitable video cable.
If your television provides RGB inputs, and your LaserDisc had
RGB outputs, you can achieve higher quality by connecting
between them using the RGB connections from the surround
controller's TV SCART connector.
The TV SCART connector also provides a Function Select signal,
used by most televisions to perform input switching.
32
Television
Audio lead
TUNER MONITOR
A5 AUDIO
OUT
OUT
Video leads
To connect a VCR
541 Surround Controller
VCR VCR1
OUT IN
IN
Connect the VCR audio outputs to the surround controller's
VCR1/A6 audio inputs using an audio phono lead.
Connect one pair of the surround controller's TAPE OUT
sockets to the VCR audio inputs using an audio phono lead.
Connect the VCR composite video output to the surround
controller's VCR1/V3 C-VIDEO IN input using a composite
video lead.
Connect the surround controller's VCR C-VIDEO OUT socket
to the VCR composite video input using a composite video
lead.
Video recorder
Audio leads
TAPE OUT A6
OUTPUTS
Video leads
AUDIO
INPUTS
VIDEO