Using The Calibration Procedure - Meridian 541 User Manual

Using the calibration procedure

As you run the calibration procedure the name of each
loudspeaker is shown on the front panel display. The on-screen
display also provides additional text explaining what to do, and
sample displays are reproduced in the following sections for
reference. For information about setting up the on-screen
display see On-screen display, page 30.
Using a Sound Pressure Level meter
Although you can perform the calibration procedure by ear, it is
recommended that you perform the tests using a Sound
Pressure Level meter, available fairly cheaply from Tandy/Radio
Shack, or your Meridian dealer may be able to lend you one.
Set the Sound Pressure Level meter to C weighted, and slow.
Take readings from the listening position, holding the meter
vertical at head height.
42
To start the calibration procedure
Put the surround controller into standby by pressing the Off
key.
Press and hold the front panel Off key for at least five
seconds.
The display shows:
The on-screen display shows:
C a l i b r a t i o n