Snmpv3 Usm Users; Configuration Of Snmpv3 Users Via The Ini File; Table 8-13: Snmpv3 Security Levels; Table 8-14: Snmpv3 Predefined Groups - AudioCodes Mediant 1000 User Manual

User's Manual
8.2.6.2

SNMPv3 USM Users

One can configure up to 10 SNMPv3 USM users. Each user can be configured for one
of the following security levels:
Security Levels
noAuthNoPriv(1)
authNoPriv(2)
authPriv(3)
Each SNMPv3 user must be associated with one of the pre-defined groups listed in
the following table.
Group
ReadGroup1
ReadWriteGroup1
TrapGroup1
ReadGroup2
ReadWriteGroup2
TrapGroup2
ReadGroup3
ReadWriteGroup3
TrapGroup3
8.2.6.3

Configuration of SNMPv3 users via the ini File

Use the SNMPUsers INI table to add, modify and delete SNMPv3 users.
The SNMPUsers INI table is a hidden parameter. Therefore, when you do a "Get INI
file" operation on the web interface, the table will not be included in the generated file.
The table columns are described below.
Version 5.2

Table 8-13: SNMPv3 Security Levels

Authentication
none
MD5 or SHA-1
MD5 or SHA-1

Table 8-14: SNMPv3 Predefined Groups

Get Access? Set Access?
Yes No
Yes Yes
No No
Yes No
Yes Yes
No No
Yes No
Yes Yes
No No
159
8. Mediant 1000 Management
Privacy
none
none
DES, 3DES, AES128, AES192, or
AES256
Can Send Traps?
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Security Level
noAuthNoPriv(1)
noAuthNoPriv(1)
noAuthNoPriv(1)
authNoPriv(2)
authNoPriv(2)
authNoPriv(2)
authPriv(3)
authPriv(3)
authPriv(3)
July 2007