Menu Structure - Tascam DR-701D Reference Manual

2 – Names and functions of parts
NOTE
Sometimes a
Battery Low
recording or conducting other demanding operations even
when battery power remains.
HDMI connection status
5
This shows the HDMI connection status.
No indicator: ; HDMI not connected
: HDMI connected
: HDMI connected (clock sync)
Recording setting status
6
These show whether or not recording is enabled. (see
"Setting channels to record" on page 25)
: recording not enabled
: recording enabled
Phantom power status
7
These show whether phantom power is on or off.(see
"Setting phantom power" on page 22)
No icon: Phantom power off
: Phantom power on
MIX recording setting status
8
: MIX recording off
: MIX recording on
Level meters
9
These show the levels of the input and playback signals.
The dotted lines at the −20dB (b mark) and −12dB
positions are guides for input level adjustment.
Remaining time
0
When playing back, this shows the remaining time (hours:
minutes) of the current file.
When recording, this shows the remaining time (hours:
minutes) of the SD card.
Peak values in decibels (dB)
q
During playback, the maximum level that occurs in a fixed
period of time is shown in decibels for each channel.
During recording, the peak input level values are shown in
decibels.
Project name
w
This shows the name of the project being recorded or
playing back.
A project is a group of files used for recording/playback.
Trim values
e
These show the settings of the 1/2/3/4 knobs.
GANG status
r
These show the GANG operation status of the 1/2/3/4
knobs.(see "Setting the GANG operation mode" on page
34)
: Set to GANG group 1
: Set to GANG group 2
10
TASCAM DR-701D
warning appears when

Menu structure

The first time, press the MENU button to open the
of the menu. In the future, press this button to reopen the menu
page that was last open.
The Menu Screen has 18 pages organized by types of menu
items.
Page name
1
INPUT
2
MIXER
3
PHASE/DELAY
4
LEVEL CONTROL
5
TRIM GANG
6
OUTPUT LEVEL
7
MIC POWER
8
RECORD
9
REC SETTING
10
FILE
11
MEDIA
12
TIME CODE
13
SLATE TONE
HDMI AUDIO
14
ASSIGN
15
METER/TRIM
16
POWER MANAGEMENT
17
REMOTE
18
SYSTEM
page
INPUT
Meaning
Make input settings.
Make built-in mixer settings.
Make input phase settings and
compensate for mic distances.
Make input level settings.
Make GANG operation
settings.
Make output level settings.
Make mic power settings.
Make recording channel
settings.
Make recording settings.
Make file settings.
Make media settings.
Make time code settings.
Make slate tone settings.
Set HDMI output audio assign-
ments.
Make meter and trim settings.
Make power management
settings.
Make remote control settings.
Make system settings.