10-Connecting With A Computer - Tascam DR-07mk II Owner's Manual

10–Connecting with a computer
By connecting this unit with a computer using
the USB cable, you can transfer audio les on the
microSD card in the unit to a computer, as well
as transfer audio les on the computer to the
microSD card in the unit.
This unit can handle audio les of the following
formats.
MP3: 32k-320kbps, 44.1k/48kHz
WAV: 44.1k/48k/96kHz, 16/24 bit
PC
NOTE
Instead of using USB to connect the DR-07MKII and a
computer, you can also conduct the same operations
by removing the microSD card from the DR-07MKII and
104
TASCAM DR-07MKII
USB (mini B)
connecting it directly to a computer that has a built-in
microSD card slot or by using a card reader.
CAUTION
You cannot use this unit' s other functions when it is
connected to a computer by USB.
The unit should be connected directly with the computer
instead of via a USB hub.
When the unit is connected through USB after
being turned on, or when the unit is turned on
after being connecting through USB, the
screen appears to choose between bus
SELECT
power supply or data transmission through USB.
Use the + or − button to select
press the Á button to connect the unit with the
computer for data transmission. The message of
" " appears in the display.
USB connected
USB
, and
STORAGE