Assembly - Yeti Cycles AS-R CARBON 2011 Owner's Manual

Assembly

Yeti tips
Make sure your tools are in good condition. A
worn allen key can round the hex bolt preventing
proper torque. Be careful when using ballend
allen wrenches for the same reason.
Torque settings are listed throughout the
instructions. It is also important to prep all bolt
threads. The instructions denote whether to use
a blue Loctite compound or grease.
assemblY 20
tOOls neeDeD
2-5mm allen keys
6mm allen key
Fox Guide pin tool
Dead blow hammer
time
30-45 minutes depending
on condition of the bike
Not every tool may be needed for the assembly /
disassembly of your bike. The list encompasses
all the tools necessary to completely assemble
and disassemble a each bike.
Warning:
Service on Yeti bicycles requires special
knowledge and tools. Yeti Cycles recommends that all
service and repairs be performed by an authorized Yeti
dealer.