Elation emotion User Manual page 41

w w w . e l a t i o n l i g h t i n g . c o m
LAUNCH THE SYSTEM RESTORE PROCESS
Use the keyboard to navigate to the line that says "USB" (second line in SCREEN
image on the previous page)
Press enter and continue pressing enter until you see the Windows Fish (shown
below), at which point stop pressing enter. You have now successfully booted to the
USB stick.
FOLLOW THE ON-SCREEN PROMPTS
Once the system restore process has begun, please follow the on-screen instructions
to choose a partial restore or a full restore. A partial restore will remove and reinstall
all graphics engine software. A full restore will remove graphics engine software and
all user content. Both methods cannot be undone.
PROCESS CONTINUES AND ENDS AUTOMATICALLY
After choosing the on-screen confirmation to being the system restore, the process
will copy needed files over to the graphics server, and make all necessary changes.
The process will prompt the removal of the USB stick. This is highlighted by green text
on screen saying the server will restart automatically. After the restart there are
various setup items that will be completed. Windows will notify of settings being
applied and may restart. Please wait for approx. 10 minutes to allow all the window
processes to complete, and the server complete. At this time, it may be necessary
to power cycle the entire fixture, to ensure that proper motion system and graphics
system communications align.
EMOTION™ GRAPHICS SYSTEM RESTORE –
UTILITY MENU / USER MENU / USER CONTENT DELETION
There is a helper utility on the USB stick to aid the recovery of a fixture in the event
corrupted content is added by mistake. To access this utility, access the system
restore USB stick via the method described above. (Reboot, F10, choose USB, Press
enter for the Betafish) After booting to the USB stick, press the "Utilities" button, the
hard drive will be scanned and there will be one option to delete all user content.
Press "Confirm" and the process ends quickly and automatically. Exit and remove
the USB stick, the fixture should start normally.
41
EMOTION™ User Manual Ver. 1