Elation emotion User Manual page 39

EMOTION™ GRAPHICS ENGINE SOFTWARE UPDATE [continued]
Follow on-screen prompts to update software.
(This dialog box is asking for the location of the .BDL file that was downloaded)
EMOTION™ MOTION SYSTEM FIRMWARE UPDATE
The EMOTION™ fixture has a separate procedure to update the firmware of the
motion system. This update process requires the use of a separate loading device.
Please contact support for more information, and reference the procedures that
are enclosed with the firmware device.
EMOTION™ GRAPHICS SYSTEM RESTORE – USB STICK
At times there are system changes that affect the foundation of the graphics engine.
These changes cannot be accomplished through the update process mentioned
above. By using a system image and a bootable USB stick, the System Restore
method can reset the entire system to a factory default state.
Process Outline:
Download a system restore image from the support website.
Prepare the USB stick System restore.
Place the USB stick in the fixture to restore and boot from it by pressing F10.
Launch the System Restore process.
Follow the onscreen prompts:
o Partial restore: User content will be unaffected
o Full restore: User content will be removed
o Confirm, and process will complete.
Remove USB when prompted by green text at next restart.
Process will complete automatically.
w w w . e l a t i o n l i g h t i n g . c o m
39
EMOTION™ User Manual Ver. 1