Technical Specification - Heatrae Sadia Multipoint SS V 50 Fitting Instructions And User Manual

1.2 PACK CONTENTS
Before commencing installation please check that the following
components have been supplied in the Installation Kit:
• Multipoint SS Unit (x1)
• Expansion vessel 3/4" BSP male, precharge pressure 3.5bar (x1)
• Expansion vessel wall mounting bracket (x1)
• Pressure reducing valve 3.5 bar, 22mm x 22mm compression (x1)
• Single check valve 22mm x 22mm compression (x1)
• Pressure (expansion) Relief Valve 1/2"BSP x 1/2"BSP female, factory
set at 6 bar (x1)
• Tundish, 22mm x 15mm compression (x1)
• 3/4" compression nuts (x2)
• Copper olive, 22mm (x2)
• Element plate tool (x1)
• Mounting brackets (x4)
• User Instructions
• Guarantee Card

2.0 TECHNICAL SPECIFICATION

Electrical Rating
Capacity
Weight (100 Litre)
Weight (80 Litre)
Weight (50 Litre)
Operating pressure
Rated pressure
Expansion vessel charge pressure
Expansion relief valve setting
Minimum supply pressure
Maximum supply pressure to PRV
Temperature / Pressure Relief Valve
4
3.0kW @ 240v / 2.8kW @ 230v
50,80 & 100 litres
30Kg (empty), 130Kg (full)
24Kg (empty), 104Kg (full)
18Kg (empty), 68Kg (full)
0.35 MPa (3.5 bar)
0.6 MPa (6.0 bar)
0.35 MPa (3.5 bar)
0.6 MPa (6.0 bar)
0.08 MPa (0.8 bar)
1.6 MPa (16.0 bar)
90°C / 1.0 MPa (10.0 bar)